Easy 3Dflex for Mixed Media and sculpting

Make air dry clay with Powertex and Easy 3Dflex      &     Create thick and coarse textures in Mixed Media paintings.

Easy 3Dflex project by Regine Dossche - Powertexcreations

Easy 3D flex is an inorganic filling compound which comes as a powder.

Easy 3D flex and Powertex need to be mixed with a scraper or palette knife and can be applied with a palette knife or sculpted by hand.

Adding more and more of the white powder will result in a thick sculpting clay that dries to the air and gets rock hard.

Important : This medium will show cracks when applied in a thick layer, by drying in the sun or close to a heat source or by adding water or Bister to the surface.

It will get you the most amazing results.


However, cracks can be avoided by applying the product in thin layers with enough drying time in between, or by adding a little bit of white sand.

Into the thick sculpting paste one can press very detailed prints  with stencils, stamps, sea shells, rope, screws, buttons, etc...

Easy 3D flex can also be used to thicken acrylic paints to achieve more textured effects in paintings.

 This product is natural and non-toxic, but can dry out the skin. We recommend wearing gloves or using hand cream.

Easy 3D flex is available in 250g, 1 kg and 4 kg.

Click here to be directed to the instruction page How to use Easy 3Dflex.

Detail of Mixed Media painting with Easy 3Dflex